Illinois Coal Resource Shapefiles
Colchester, Danville, Davis, Dekoven, Herrin, Jamestown, Seelyville, and Springfield Coals in Illinois
Below are links to the digital coal resource shapefiles available from the ISGS Coal Section. The listed shapefiles are the same ones that were used to construct the County Coal Map Series maps and State Coal maps.
These digital files have been reviewed and edited and meet the standards of the Illinois State Geological Survey with regard to scientific and technical quality and are suited to the purpose and the use intended by the ISGS Coal Section. They present reasonable interpretations of the geology of the area and are based on available data. However, the interpretations are based on data that may vary with respect to accuracy of geographic location, the type and quantity of data available at each location, and the reliability of the data sources. Consequently, the accuracy of unit boundaries and other features shown in these files varies from place to place.
This data set provides a large-scale conceptual model of the geology of the area on which to base further work. Any map or cross section included herein is not intended for use in site-specific screening or decision-making. Use of this document does not eliminate the need for detailed studies to fully understand the geology of a specific site. The Illinois State Geological Survey and the University of Illinois make no guarantee, expressed or implied, regarding the correctness of the interpretations presented in this data set and accept no liability for the consequences of decisions made by others on the basis of the information presented here.
Reference documentation for digital spatial data files that accompany
the Illinois Minerals report series; Availability of Coals for Mining in
Illinois, can be found in the following publications:
IM 118, Springfield Coal, 1999 (15.4 MB PDF file),
IM 120, Herrin Coal, 2000 (52 MB PDF file),
IM 124, Danville, Jamestown, Dekoven, Davis, and Seelyville Coals, 2002 (9.1 MB PDF file),
IM 127, Colchester Coal, 2003 (40.4 MB PDF file), Illinois State Geological Survey, Coal Section.
Other data files were created for Coal Section project use. See the .htm metadata files for specific shapefile documentation, as updates may have been made since the time of PDF report publication.
Sources of data and limitations of maps/spatial coverages:
The maps/digital files used for these studies were compiled from data obtained from a variety of public and private sources and have varying degrees of completeness and accuracy. The maps are designed for regional assessment and have a resolution of 1:500,000. Features or details of features smaller than about one-half mile across may not be accurately portrayed or may be omitted altogether.
This digital data is expected to be used as-is, and is not to be altered by the user. See metadata text for additional detailed information on the creation of the dataset elements, use constraints, etc.
Click on the file names in the table below to download. GIS shapefiles are in unprojected Geographic Decimal Degree, NAD83. See .prj text files or .htm metadata files for specific spatial reference information, and see .htm metadata files for complete GIS shapefile documentation.
Mine and Coal Resource Files
all-coal-mines.zip - Shapefiles of coal mine points and polygons, including active mines, as of July 2012. 11 MB
colchester-coal.zip - Shapefiles pertaining to the Colchester coal, as of July 2012. 21 MB
danville-coal.zip - Shapefiles pertaining to the Danville coal, as of July 2012. 15 MB
dekoven-davis-coal.zip - Shapefiles pertaining to the Dekoven and Davis coals, as of July 2012. 6 MB
herrin-coal.zip - Shapefiles pertaining to the Herrin coal, as of July 2012. 56 MB
jamestown-coal.zip - Shapefiles pertaining to the Jamestown coal, as of July 2012. 2 MB
net-coal-thickness.zip - Shapefile of the remaining cumulative (net) coal thickness of mapped seams, greater than 18 inches, in IL. 10 MB
seelyville-coal.zip - Shapefiles pertaining to the Seelyville coal, as of July 2012. 2 MB
springfield-coal.zip - Shapefiles pertaining to the Springfield coal, as of July 2012. 28 MB
counties.zip - Shapefile of all counties in Illinois. 1 MB
townships.zip - Shapefile of all townships in Illinois. 1 MB
sections.zip - Shapefile of all sections in Illinois. 7 MB
pennsylvanian-extent.zip - Shapefile of the extent of the coal-bearing Pennsylvanian System of rocks in Illinois. 0.1 MB
Stratigraphic Data Files
majorcoals-stratdata.zip - Shapefile of stratigraphic information for the Danville, Herrin, and Springfield Coals from over 50,000 drill hole and outcrop descriptions of Pennsylvanian stratigraphy, as of December 2012. 3 MB
minorcoals-stratdata.zip - Shapefile of stratigraphic information for the Jamestown, Colchester, Seelyville, Dekoven, Lower Dekoven, and Davis Coals from over 10,000 drill hole and outcrop descriptions of Pennsylvanian stratigraphy, as of December 2012. 1 MB
majorcoals-stratdata-ascii.zip - ASCII text file and Excel table of stratigraphic information for the Danville, Herrin, and Springfield Coals from over 50,000 drill hole and outcrop descriptions of Pennsylvanian stratigraphy, as of December 2012. Coordinates have been calculated for each point location. 4 MB
minorcoals-stratdata-ascii.zip - ASCII text file and Excel table of stratigraphic information for the Jamestown, Colchester, Seelyville, Dekoven, Lower Dekoven, and Davis Coals from over 10,000 drill hole and outcrop descriptions of Pennsylvanian stratigraphy, as of December 2012. Coordinates have been calculated for each point location. 1 MB
Updated 12/20/2012 AGL