The bedrock topography is shown as 50-foot (15-meter) contours of bedrock elevation above mean sea level (msl). Bedrock elevations range from less then 250 feet (76 meters) in southern Illinois to more than a 1000 feet (300 meters) in the northwestern part of the state. Several major bedrock valleys are found across the state.
The greatest control for the present bedrock surface configuration was probably the preglacial surface configuration. The interpretations of bedrock topography have been modified since the 1950's. Horberg contoured his map with the philosophy that the bedrock surface map represented the preglacial topography modified by glacial erosion, which formed U-shaped valleys. The current map, showing narrow valley channels and bedrock knobs in wide channels, indicates complex preglacial and glacial erosion primarily from running water. The major valleys were formed before the minor valleys that appear as tributaries. Streams that formed during successive glaciations probably eroded to bedrock and produced the small tributary valleys to the main channels. The bedrock surface was less likely to be eroded as sediments accumulated during each successive glaciation.
The Buried Bedrock Surface of Illinois will be useful in fields such as groundwater resource planning, engineering geology and earthquake hazard mapping. Data shown on this map were compiled from geologic data from drill holes, samples, surface observations and geophysical data from downhole logging and surface studies.
The data are not appropriate as a geodetic, legal or engineering base. The data set was not and is not intended as a substitute for surveyed locations, such as can be determined by a registered Public Land Surveyor. Although useful in a GIS as a reference base layer for maps, the data set has no legal basis in the definition of boundaries or property lines.
Reproduction or redistribution of copyrighted digital data sets or products derived therefrom outside of licensee's organization or entity is expressly forbidden. The only exception is redistribution to consultants working for the licensee, and then only for purposes, related to work for the licensee. Such consultants may not further reproduce or redistribute these data sets. None of these data shall be electronically duplicated on magnetic or optical media for use by others, in whole or in part, without permission of DNR.
Any hardcopies utilizing DNR data sets shall clearly indicate their source. If the licensee has modified the data in any way they are obligated to describe the types of modifications they have performed on the hardcopy map. Licensee specifically agrees not to misrepresent DNR data sets, nor to imply that changes they made were approved by DNR.
The features were imported into the ISGS SDE enterprise database following steps outlined in ISGS procedure GISDB_0009.
Metadata updated.
CONTOUR The elevation above msl in Lambert feet. Values range from 200 to 1000 with a contour interval of 50 feet. A value of zero (0) is used to indicate the state boundary or areas where bedrock is at or near the surface.
In no event shall the DNR have any liability whatsoever for payment of any consequential, incidental, indirect, special, or tort damages of any kind, including, but not limited to, any loss of profits arising out of use of or reliance on the geographic data or arising out of the delivery, installation, operation, or support by DNR.
It is expected that customers who order this data have the technical expertise to use GIS software. The ISGS does not provide software support of any kind.
Illinois Natural Resources Geospatial Data Clearinghouse
Generated by mp version 2.8.11 on Wed Jul 11 14:59:13 2007