United States Geological Survey 2007 20071017 digital raster data http://www.isgs.illinois.edu/ http://illinois.edu NOTICE: THIS IS NOT an official USGS metadata file for RCCs. This is an ISGS metadata entry for cataloging purposes. You are encouraged to consult the original USGS metadata file. This metadata file applies to the overall collection. The individual RCCs are accompanied by their original USGS metadata. This is a file collection of USGS Raster Color Composite (RCC) GeoTIFF images. They are georeferenced images of USGS topographic maps, from the DRG (digital raster graphic) family of USGS products, essentially the same as DRGs but at a higher resolution. See the supplemental information section for more about RCCs. Resolution is 500 and 1000 dots per inch (dpi). The spatial reference is UTM zone 15 or 16, NAD 1927 or 1983, as appropriate to the individual map images. The collection includes about 75 7.5-minute quadrangles in Illinois that have been obtained for recent geologic mapping efforts. The majority of the files show the entire topotraphic map. Some, however, show only the text layer. The majority are archived "as delivered", but a handful have been subsequently processed to add a blue fill for water bodies. Any combination of "as delivered" files with the following extensions may accompany the RCC GeoTIFFs: .dat - a list of parameters about the image, .fgd - the USGS metadata file, .tfw - the TIFF world file. The image files also have related ESRI ArcGIS files such as .rrd and .aux. Naming convention: The files are named according to the traditional USGS quadrangle convention, e.g. 37088d8.tif. Files with 1000 dpi resolution have "1000" appended to the file name, e.g. 37088d8_1000.tif. Files that have an added color fill for water bodies have the letter "f" appended to the file name, e.g. 37088d8f.tif. Note that the bounding coordinates reported below are for the entire state of Illinois, not for any single quadrangle. These data are appropriate for use in local and regional thematic analysis. The data are not appropriate as a geodetic, legal or engineering base. The data set can serve as an important base cartographic element for many types of maps. The data set was not and is not intended as a substitute for surveyed locations, such as can be determined by a registered Public Land Surveyor. Although useful in a GIS as a reference base layer for maps, the data set has no legal basis in the definition of boundaries or property lines. The following documentation was reproduced from a file called documentation.txt on one of the delivery CDs. The RCC is a composite of the separates. It appears that in this discussion the terms DRG and RCC are used interchangably. rcc = Raster Color Composite. DRGs at 500 and 1000 dpi. rcs = Raster Color Separate. With collar information removed rfs = Raster Feature Separate. Conform to a draft archive standard. Traditional analog feature separates The original materials for a USGS 7.5-minute quadrangle are various types of mylar negatives. Most of these materials are scribecoats -- mylar sheets coated with a thin layer of wax. During original map compilation the wax was scraped off with precision scribing instruments, producing what is essentially a hand-crafted negative. The organization of these materials was driven first by the 7.5-minute format of the maps, and second by the color characteristics of the quadrangles. Traditional USGS maps are printed with five colors of ink (black, red, brown, green, blue). The white paper makes a sixth color, and purple was added in the 1960s as a seventh. Six additional colors are typically simulated with lithographic screens. All the features on one feature separate are of the same color, but not all features of the same color are on one separate. Over the years conventions and production guidelines were developed for what features should be grouped together on a separate, but these relationships were never formally standardized. The average quadrangle has about eight feature separates, but it is not unusual for there to be as many as 20. The mylar separates are saved in USGS archives for every topographic quadrangle. Although the mylar is fairly durable, it does not last forever. As quads are reprinted and revised, the mylar sheets are refreshed by photographic copying. Unfortunately, each generation of copying degrades the image quality slightly. Some layers of some quadrangles are on their sixth or seventh generation, with visible deterioration in the linework. Digital feature separates Starting in the early 1990's, digital drafting tools began to replace scribing in map revision. A map revision typically begins with scanning the feature separates of the old map. The resulting digital separates are updated in computer aided drafting (CAD) environments. The primary outputs of the revision are digital feature separates that can be combined to make press negatives to print a new map, or a digital composite that can be used to make a digital raster graphic (DRG). The USGS has always sold copies of the mylar feature separates, and there is now a growing demand for digital feature separates. Even if this were not true, there is still a need to standardize the format, packaging, and archive methods of digital feature separates to ensure that data produced today can still be found and read the next time they are needed. DRG characteristics The DRG images were made by combining the RFS files. They are standard USGS DRGs, except that (1) the scan resolution is 1000 dpi instead of 500 dpi and (2) no FGDC metadata files are present. RFS characteristics The RFS images will display as black-and-white positives. The physical file format is very close to that of DRGs. The images conform to TIFF 6.0 and GeoTIFF 1.0. They are 8-bit palette color images with PackBits compression. Most of the same TIFF tags and GeoTIFF keys that are populated for DRGs are also populated for these RFS. Image quality The image quality of a RFS is always better than that of a DRG made by scanning a paper map. Scanning mylar materials at 1000 dpi always produces a sharper image than scanning paper at any resolution. Nevertheless, there will still be significant variation in the quality of RFS, depending on the condition of the source materials. 1957 2000 publication date Complete Annually -91.625 -87.375 42.625 36.875 none raster color composite rcc quadrangle usgs topographic image none Illinois ISGS information must be obtained directly from the ISGS or from an authorized distributor. Be aware that ISGS information obtained from an unauthorized third party may have been altered subsequent to original distribution, or may no longer be current. Any access to these data, Web sites, computer systems, electronic services, and electronic networks is governed by University and campus policies, in particular, but not limited to, the Policy on Appropriate Use of Computers and Network Systems at the University of Illinois at Urbana-Champaign, the ISGS Terms of Use document available at the ISGS Web site, and the University of Illinois Web Privacy Notice. Links to these are provided in the Cross References section. ISGS information is the property of and copyrighted by the Board of Trustees of the University of Illinois with all rights reserved.  University copyright policy is stated in the General Rules Concerning University Organization and Procedure, Article III, Section 4. A link is provided in the Cross References section. Individuals or entities may make fair use of copyrighted ISGS material, such as reproducing a single figure or table, or using a brief text quotation, without obtaining formal permission, but in all cases the Illinois State Geological Survey must be credited as the source of the material. To reproduce ISGS information beyond the fair use standard, permission must be obtained from the ISGS Information Office, 615 East Peabody Drive, Champaign, Illinois 61820, 217-333-4747, isgs@isgs.illinois.edu. License fees and a license agreement may be required, depending on the proposed usage. Any use of these data is governed by University and campus policies, in particular, but not limited to, the Policy on Appropriate Use of Computers and Network Systems at the University of Illinois at Urbana-Champaign, the ISGS Terms of Use document available at the ISGS Web site, and the University of Illinois Web Privacy Notice. Links to these are provided in the Cross References section. Map information is to be used at a scientifically and cartographically appropriate scale, that is, at a scale no greater than indicated on the map or as described in the documentation of the map or map data.  Map information is not appropriate for, and is not to be used as, a geodetic, legal, or engineering base. Map information has no legal basis in the definition of boundaries or property lines and is not intended as a substitute for surveyed locations such as can be determined by a registered Public Land Surveyor. The data do not replace the need for detailed site-specific studies. Please refer to the Distribution Information section. ArcSDE 9.1 on Oracle 10g http://www.isgs.illinois.edu http://www.vpaa.uillinois.edu/policies/web_privacy.cfm http://www.uillinois.edu/trustees/rules.cfm#sec34 http://www.fs.uiuc.edu/cam/CAM/viii/viii-1.1.html none, see USGS metadata none, see USGS metadata The collection includes about 75 7.5-minute quadrangles in Illinois. The USGS metadata may have more information. none, see USGS metadata United States Geological Survey varies raster digital data United States Geological Survey 24000 digital file varies publication date none map image, or in some cases, text layer only The data were received from on CD from the USGS and loaded into the GISDB file repository. Some files were named with a "g" or "geo" at the end of the file name. The meaning of these designations is unknown and they were removed from the file name. If there were duplicate files for a given quad only the file with the most recent date was retained. Two files had undefined projections (o38089f8_1000.tif and o37089g5_1000.tif.) The projections were defined to be that shown on the map image. Raster pyramids (.rrd) were added in ArcCatalog with the Batch Build Pyramids tool. This also added the .aux files. 20071017 New data received on CD from the USGS were loaded into the GISDB file repository for 24K quads Aurora South, Brussels, Gorham, Herod, Highland Park, New Athens East, Nutwood, and Winfield. Some files were named with "geo" at the end of the file name. The meaning of this designation is unknown and it was removed from the file name. Raster pyramids (.rrd) and .aux files were added using ArcCatalog. 20080609 Raster Pixel varies varies Universal Transverse Mercator 15 or 16 as appropriate 0.9996 -93.0 or -87.0 as appropriate 0.0 500000 meters 0.0 row and column varies varies meters NAD27 or NAD83 as appropriate This information applies to DRGs and is assumed to apply to RCCs as well. Each raster entity or pixel contains a color index from 0 through 12 referencing a color palette of RGB values from 0 through 255 in which the standard colors used in the DRG are defined. > USGS DRG Color Palette > > Digital Number Color Red Green Blue > > 0 Black 0 0 0 > 1 White 255 255 255 > 2 Blue 0 151 164 > 3 Red 203 0 23 > 4 Brown 131 66 37 > 5 Green 201 234 157 > 6 Purple 137 51 128 > 7 Yellow 255 234 0 > 8 Light Blue 167 226 226 > 9 Light Red 255 184 184 > 10 Light Purple 218 179 214 > 11 Light Grey 209 209 209 > 12 Light Brown 207 164 142 > Information Office, Illinois State Geological Survey (ISGS), a division of the Institute of Natural Resource Sustainability (INRS) of the University of Illinois mailing and physical address

615 East Peabody Drive

Champaign Illinois 61820 USA 217-333-4747 217-785-0211 isgs@isgs.illinois.edu 8:00 a.m. - 4:30 p.m., Monday-Friday, U.S. Central Time Refer to the Legal Notices of Terms and Conditions of the University of Illinois Web Privacy Policy (there is a link in the Cross References section) for policy statements regarding the following: Disclaimer of Liability Disclaimer of Warranties and Accuracy of Data Disclaimer of Endorsement Disclaimer for External Links Disclaimer of Duty to Continue Provision of Data Security Choice of Law By obtaining these data you agree to the provisions of the University of Illinois Web Privacy Policy, regardless of the manner in which the information was obtained. The data are intended for use with GIS software. The ISGS uses ESRI ArcGIS software, however, ESRI formats can be imported into many different GIS software packages. It is expected that customers who obtain these data have the technical expertise to use GIS software. The ISGS does not provide software support of any kind. 20090224 Please refer to the Distribution Information section. FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998 local time The access constraints as stated for the data apply also to the metadata. Refer to the Access Constraints section of the Identification Information section. The use constraints as stated for the data apply also to the metadata. Refer to the Use Constraints section of the Identification Information section. http://www.esri.com/metadata/esriprof80.html ESRI Metadata Profile